b'COOLING & HEATING COOLING & HEATINGHeater Take offHeater Hose Joiner TubeOur angled heater stubs are the ideal solution to leaking heater taps bolted to the cylinder head.Part Number: HOT3044 1/2 to 5/8 18gThese have no mechanism to leak - they are fullyPart Number: HOT3045 5/8 to 5/8 14gopen all the time. Such a simple solution and ourPart Number: HOT3046 1/2 to 1/2 14gbest selling product.If you are replacing that heater tap you will want the 1/2 version, but we also offer a 5/8 version for the convenience of people using 5/8 hoses with the later heaters. RetroSport Heater Tap AssemblyWe also offer 1/2 and 5/8 versions of the verti- 1/2 to 5/85/8 to 5/8 1/2 to 1/2The RetroSport heater tap, for 1987-97 cars that cal stub and a blanking plate if you need it. use an in hose type assembly. This item works If you have no need for a water outlet but want toBulkhead Hose Adaptorwith the standard heater cable and 5/8 heater hose.fit an additional temperature sensor then considerDesigned to suit the RetroSport bulkhead plates, our tapped versions, available with a range ofPart Number: HOT3047 In Hose Type 87-97 98gthreads. single and twin holes.Part Number: HOT3049 1/2 to 5/8 30gPart Number: HOT3032 Angled - 1/244g Part Number: HOT3050 5/8 to 5/8 26gReplaces the heater tap on the cylinder head Part Number: HOT3051 1/2 to 1/2 28gPart Number: HOT3033 Angled - 5/8 46gPart Number: HOT3039 Vertical - 1/2 30gPart Number: HOT3040 Vertical - 5/8 30gPart Number: HOT3038 Blanking Plate 20gPart Number: HOT3041 Tapped 5/8 UNF 28gFor standard temperature sensor 1/2 to 5/85/8 to 5/8 1/2 to 1/2Part Number: HOT3042 Tapped M12 x 1.5 30g Also available without the tap (fit to your exist-For Mpi temperatureing one) as part number HOT3048 (58g).sensorPart Number: HOT3043 Tapped M12 x 1.25 30gFor some aftermarket temperature sensorsBulkhead Blanking PlatePart Number: HOT3034 no holes 86gPart Number: HOT3035 1 x 20mm Hose Hole 86gPart Number: HOT3036 2 x 20mm Hose Holes 86gAngled 1/2Angled 5/8Vertical 1/2 If you are fitting this item with one of our thermostat side engine steady systems, you will need to drill out 3 of the holes.Vertical 5/8 Blanking PlateTapped 5/8 UNFTapped M12Tapped M12 x x 1.5 1.25Order online at www.dsnclassics.co.uk 29 30'